Screw specifications
M2 × L2.5
M2.5 × L5
Go to
https://support.lenovo.com/partslookup
replacement part:
Hinge
Remove the sensor board
Make sure the following FRUs (or CRUs) have been removed.
"Remove the LCD module" on page 32
"Remove the hinge cover" on page 33
"Remove the LCD bezel" on page 34
"Remove the LCD panel" on page 34
Step 1.
Turn over the sensor board.
Figure 40. Turn over the sensor board
Step 2.
Disconnect the sensor board cable and remove the sensor board.
Figure 41. Remove the sensor board
Go to
https://support.lenovo.com/partslookup
replacement part:
Sensor board
Remove the EDP cable
Make sure the following FRUs (or CRUs) have been removed.
"Remove the LCD module" on page 32
"Remove the hinge cover" on page 33
"Remove the LCD bezel" on page 34
"Remove the hinge rubber" on page 35
"Remove the sensor board" on page 36
Step 1.
Remove the EDP cable.
Figure 42. Remove the EDP cable
Go to
https://support.lenovo.com/partslookup
replacement part:
EDP cable
Remove the microphone rubbers
Make sure the following FRUs (or CRUs) have been removed.
36
IdeaPad Gaming Chromebook (16", 7) and IdeaPad 5i Chromebook (16", 7) Hardware Maintenance Manual
Number of screws
6
2
to look up the Lenovo part numbers of the following
to look up the Lenovo part numbers of the following
to look up the Lenovo part numbers of the following