Gaggenau CX 492 Information For Use page 21

Notes
¡ Do not use hard or rough objects such as bristle
brushes or scouring pads to clean the hob, and do
not use scouring agents.
17 Dynamic cooking for an item of cookware
Allows you to boil with preset power levels for an item
of cookware that you place on the cooking surface.
This enables the power level to be changed during
cooking by sliding the cookware forwards or back-
wards. Preset power levels: 1.0, 3.0, 5.0, 7.0, 9.0.
You can change the preset power levels in the basic
settings.
Notes
¡ If the function is not available, the cookware may be
too large. In this case, use a smaller item of cook-
ware.
¡ - If the function is not activated, the maximum power
of the appliance may have been reached.
¡ Further information on the size and positioning of
cookware can be found in the chapter entitled "Suit-
able cookware." → Page 5
17.1 Switching on dynamic cooking for an
item of cookware
Place the cookware on the cooking surface.
1.
Touch the cooking zone display for the cookware.
2.
Press ​ ⁠ .
3.
Swipe your finger down until
4.
to confirm the selection.
a The function is activated.
​ ⁠ appears. Touch ​ ⁠
Dynamic cooking for an item of cookware en
¡ Do not touch the wireless cooking sensor with your
fingers; this will soil or scratch it.
16.6 Declaration of Conformity
BSH Hausgeräte GmbH hereby declares that the appli-
ance with wireless cooking sensor function meets the
basic requirements and other relevant provisions of the
Directive 2014/53/EU.
A detailed Declaration of Conformity in accordance
with Directive RED can be found at www.gag-
genau.com on the product page for your appliance un-
der "Additional documents.
The logos and the Bluetooth® brand are registered
trademarks and property of Bluetooth SIG, Inc. These
trademarks are used by BSH Hausgeräte GmbH under
licence. All other trademarks and trade names are
owned by the respective companies.
Move the cookware on the cooking surface until the
5.
cooking zone display shows the desired power
level.
17.2 Changing the power level
You can change the power levels while you are cook-
ing.
Touch the power level to be changed.
1.
Select another power level in the settings area.
2.
Note: If you deactivate the function, the power levels re-
turn to the preset values.
17.3 Switching off dynamic cooking for an
item of cookware
Touch the power level display.
1.
Touch ​ ⁠ and select a different operating mode for
2.
the cookware.
Touch ​ ⁠ to confirm.
3.
a The function is switched off. The power level that
was previously selected is retained.
21