Configuring The Client Limit - Ruijie Reyee Series Faqs

Cookbook
than the disconnection threshold, the client will be disconnected from the AP and Wi-Fi network, and has to
select a nearer Wi-Fi signal.
However, a larger disconnection threshold value indicates that the client is more likely to be disconnected. To
ensure Internet access, you are advised to disable the disconnection threshold or set the value to be less than
-75 dBm.
Caution
In SON mode, the disconnection threshold settings will be synchronized to all devices on the network.
8.6.5

Configuring the Client Limit

Choose Network
If the AP is associated with too many clients, it will have a lower performance, affecting user experience. After
you configure the threshold, new clients beyond the threshold will not be allowed to access the Wi-Fi network.
You can lower the threshold if there is a requirement for bandwidth per client. You are advised to keep the default
settings unless there are special cases.
(WLAN) > Radio Frequency.
26
FAQs About Wireless Configuration