Table of Contents
Advertisement
Figure 10 Install an LSW1BFAN (2)
CAUTION:
To avoid damaging the connectors on a fan tray and backplane, slowly insert the fan tray. If you feel
•
hard when inserting the fan tray, plug out the fan tray and insert it again.
If the captive screw cannot be tightly fixed, check the installation of the fan tray.
•
Maintaining a fan tray
To ensure proper operation and long service life of your fan trays, note the following when using fan
trays:
Put on an ESD-preventive wrist strap and ensure a good skin contact.
•
Reserve adequate clearance at the air inlet/exhaust vents for ventilation.
•
Make sure that the rack or table/workbench has a good ventilation system.
•
4
Advertisement
Table of Contents
