Lubrication; Greasing The Machine - Toro Z Master 77248 Operator's Manual

Lubrication

Greasing the Machine

Service Interval: Every 25 hours—Grease the front
caster axles (more often in dirty or
dusty conditions).
Every 50 hours—Grease the pump-idler pivot.
Grease the machine more often in dirty or dusty
conditions.
Grease Type: No. 2 lithium or molybdenum grease
1. Park the machine on a level surface, disengage
the blade-control switch, and engage the parking
brake.
2. Shut off the engine, remove the key, and wait
for all moving parts to stop before leaving the
operating position.
3. Clean the grease fittings with a rag.
Note:
Scrape any paint off the front of the
fitting(s).
4. Grease the pump idler-pulley pivot with 1 or 2
pumps of grease
5. Grease the front caster axles
Figure 41
1. Pump-idler pivot
6. Wipe up any excess grease.
(Figure 41).
(Figure 41).
2. Caster axle
g296411
38