Using The Side Discharge; Adjusting The Height Of Cut - Toro Z Master 77248 Operator's Manual

Using the Side Discharge

The mower has a hinged grass deflector that
disperses clippings to the side and down toward the
turf.
DANGER
Without a grass deflector, discharge cover, or
a complete grass-catcher assembly mounted
in place, you and others are exposed to blade
contact and thrown debris. Contact with
rotating mower blade(s) and thrown debris
will cause injury or death.
• Never remove the grass deflector from the
mower deck because the grass deflector
routes material down toward the turf. If the
grass deflector is ever damaged, replace it
immediately.
• Never put your hands or feet under the
mower deck.
• Never try to clear the discharge area
or mower blades unless you move the
blade-control switch (PTO) to the O
position, rotate the key switch to the O
position, and remove the key from the key
switch.
• Make sure that the grass deflector is in the
down position.

Adjusting the Height of Cut

Using the Transport Lock
1. Push on the deck-lift pedal using your foot to
raise the mower deck
2. Push the transport-lock lever forward to unlock
the transport lock; push the transport-lock lever
rearward to lock the transport lock
FF
1. L position—the
OCK
mower deck locks into
FF
the transport position.
2. U
NLOCK
mower deck does not lock
into the transport position.
30
(Figure
Figure 33
3. Push on the deck-lift pedal
using your foot to raise the
mower deck.
position—the
33).
(Figure 33).
g336604