Toro Z Master 77248 Operator's Manual page 43

3. Disengage the blade-control switch (PTO) and
engage the parking brake.
4. Shut off the engine, remove the key, and wait
for all moving parts to stop before leaving the
operating position.
5. Drain the oil from the engine
Figure 48
(Figure 48).
g036856
g027734
43
6. Slowly pour approximately 80% of the specified
oil into the filler tube and slowly add the
additional oil to bring it to the Full mark
49).
7. Start the engine and drive to a flat area.
8. Check the oil level again.
Changing the Engine-Oil Filter
1. Drain the oil from the engine; refer to
the Engine Oil (page
2. Change the engine-oil filter
Figure 49
Changing
42).
(Figure 50).
(Figure
g235264