Using Attachments And Accessories; During Operation; During Operation Safety - Toro Z Master 77248 Operator's Manual

Figure 16
Using Attachments and
Accessories
Use only Toro approved attachments and accessories.
If you add more than 1 accessory mount kit (i.e.,
bucket kit or universal mount kit) to both of the
locations shown in
Contact an Authorized Service Dealer for the front
weight kit.
g227752
1. Add a front weight kit when accessory mount kits are
installed at both of these positions.

During Operation

During Operation Safety

General Safety
•
The owner/operator can prevent and is responsible
for accidents that may cause personal injury or
property damage.
•
Use your full attention while operating the
machine. Do not engage in any activity that
causes distractions; otherwise, injury or property
damage may occur.
•
Do not operate the machine while ill, tired, or
under the influence of alcohol or drugs.
•
Contacting the blade can result in serious personal
g227751
injury. Shut off the engine, remove the key, and
wait for all moving parts to stop before leaving the
operating position. When you turn the key to the
OFF position, the engine should shut off and the
blade should stop. If not, stop using your machine
immediately and contact an Authorized Service
Dealer.
•
Operate the machine only in good visibility and
appropriate weather conditions. Do not operate
the machine when there is the risk of lightning.
22
Figure 17, add a front weight kit.
Figure 17
g298130