Table of Contents
Advertisement
T
r
he
emix fUncTion
The special Remix-function is a shortcut to programming of
recipes. While the mixer is operated, all commands are stored,
and when a recipe is finished and
to store the entire recipe under a program number.
•
There are four program numbers.
•
A program cannot be deleted, but can be replaced.
•
The programs are not deleted in case of no power.
How to store a program:
•
First push
.
•
Run the entire recipe including pauses and changes of
speed.
•
Push
.
•
Store the program as program No. 1 by pushing first
and then also
continuously, until the total length of
the program is shown in the timer field. The timer field
will thereafter flash „P1" three times.
How to run a program:
•
First a short push on
appears in the timer field and immediately thereafter the
total length of the program will be shown. The program
is run by pushing
•
If the speed or the time is changed, or
when running a program, the program will be left and
the mixer must be run manually.
•
It is possible to remove the safety guard while running
a program. When the safety guard is reattached, the
program can be resumed by pushing
•
If the program is containing a pause, the mixer will stop
and at the same time an acoustic signal is heard. When
the operator wants to restart the mixer, push
the program will be resumed.
c
hanGe of fixed speeds
For the fields
and
for future mixing jobs. Push
or down.
If required to store the adjusted speed, push
beeps are heard and the diodes of the speed indicator are flash-
ing. The adjusted speed has now been stored in the memory.
To return to the factory settings for button
and
simultaneously, until a beep is heard.
r
:
eseT of Timer
The timer can be reset by simultaneously pushing
.
If the timer is reset while the mixer is running, the mixer
will stop.
:
is pushed, it is possible
and then on
. Now „P1"
.
is pushed
.
:
it is possible to change the speed
or
to adjust the speed up
or
and
9
o
verloadinG
The mixer must not be overloaded.
Possible overload situations:
•
•
•
Larger lumps of fat or chilled ingredients must
be reduced before they are placed in the bowl.
Prolonged overloading will cause the frequency converter
to stop the machine.
,
field; the speed will not be reduced, but the mixer will stop
and the display will change to
tion under Procedure in case of overloading.
p
rocedUre in case of overloadinG
Remove the cause of the overloading, e.g. empty the bowl.
•
Push emergency stop
•
Release emergency stop.
•
Start the mixer by pushing
r
ecommended max
and
Recommended max. speeds (fac tory setting).
r
ecommended max
until two
push
and
Recommended max. speeds for attachment drive (fac-
tory setting).
:
Working with excessively tough and heavy
dough
Mixer tool exceeding the recommended
speed
Wrong mixer tool being used.
or
will be displayed in the timer
.
.
:
speeds
.
speeds for aTTachmenT drive
. Follow the descrip-
:
:
Advertisement
Table of Contents
