Table of Contents
Advertisement
3. Using Your Digital Audio Baby
Monitor
Please read these instructions carefully, and be aware that this
Digital Audio Baby Monitor is only intended as an aid. It is not a
substitute for responsible and proper adult supervision.
3.1
Power on or off
3.1.1 Power on or off the baby unit
• Press and hold 0 to power on the baby unit. The Power/Link
indicator turns on.
• Press and hold 0 again to power off the baby unit. The Power/Link
indicator turns off.
3.1.2 Power on or off the parent unit
• Press and hold 0 to power on the parent unit. The LCD screen
turns on.
• Press and hold 0 again to power off the parent unit. The LCD
screen turns off.
NOTE
If you place the parent and baby units too close together, you may
hear a high pitched noise. This is not a fault. The units are designed
to be operated at some distance apart, e.g. in separate rooms, so
move the units further apart.
If the Power/Link indicator flashes on the baby unit or parent unit,
they are not linked to each other. Make sure that both units are
powered on, and reduce the distance between the units, but not
closer than 1 metre.
3.2
Speaker volume
3.2.1 Adjust speaker volume of the baby unit
You can adjust the speaker volume of the baby unit from
Volume
5.
• Press
or
Using Your Digital Audio Baby Monitor
on the baby unit.
Volume 1
to
13
Advertisement
Table of Contents
