Table of Contents
Advertisement
Overview of the Baby Unit
1.
Temperature Sensor
2.
Speaker
3.
Power Jack
4.
Power/Link indicator
On steadily when the baby unit
is powered on and linked to the
parent unit.
Off when the baby unit is
powered off.
Flashes when the baby unit is
out of range of the parent unit.
5.
Control Key Panel
UP / VOLUME+
Press to increase speaker
volume.
DOWN / VOLUME -
Press to decrease speaker volume.
Important guidelines for installing your Digital Audio Baby Monitor
• To use your baby unit and parent unit together, you must be able to
establish a radio link between them, and the range will be affected by
environmental conditions.
• Any large metal object, like a refrigerator, a mirror, a filing cabinet,
a metallic door or reinforced concrete, between the baby unit and
parent unit may block the radio signal.
• The signal strength may also be reduced by other solid structures,
like walls, or by radio or electrical equipment, such as TVs, computers,
cordless or mobile phones, fluorescent lights or dimmer switches.
• If the signal is poor, try moving the parent unit and/or the baby unit to
different positions in the rooms.
2
1
3
4
5
6
POWER/ LULLABY
Press and hold to power the
baby unit on or off.
In idle mode: Press to enter
lullaby menu.
In lullaby menu: Press to play or
select lullaby.
PLAY/STOP
Press to start or stop lullaby
playback.
NIGHT LIGHT
Press to turn night light on or
off.
6.
Microphone
0
/
Advertisement
Table of Contents
