Using Your Digital Audio Baby Monitor; Power On Or Off The Baby Unit; Power On Or Off The Parent Unit; Adjust Speaker Volume Of The Parent Unit - Motorola MBP160 User Manual

Motorola digital audio baby monitor user's guide
Hide thumbs Also See for MBP160:
Table of Contents

Advertisement

3. Using Your Digital Audio Baby Monitor

Please read these instructions carefully, and be aware that this digital audio baby
monitor is only intended as an aid. It is not a substitute for responsible and proper
adult supervision.
3.1

Power on or off the baby unit

• Press and hold
on.
• Press and hold
turns off.
3.2

Power on or off the parent unit

• Press and hold
turns on.
• Press and hold
indicator turns off.
NOTE
If you place the parent and baby units too close together, you may hear a high
pitched noise. This is not a fault. The units are designed to be operated at some
distance apart, e.g. in separate rooms, so move the units further apart.
If the Power/Link indicator flashes on the baby unit or parent unit, they are not
linked to each other. Make sure that both units are powered on, and reduce the
distance between the units, but not closer than 3 feet.
3.3

Adjust speaker volume of the parent unit

You can adjust the speaker volume from Volume 1 to Volume 3, or turn it off.
• Press
or
The sound level indicator lights up when you adjust the speaker volume.
The number of LED lights indicate how loud the volume has been raised.
12
to power on the baby unit. The Power/Link indicator turns
again to power off the baby unit. The Power/Link indicator
to power on the parent unit. The Power/Link indicator
again to power off the parent unit. The Power/Link
on the parent unit when it is not in use.
Using Your Digital Audio Baby Monitor

Advertisement

Table of Contents
loading

This manual is also suitable for:

Mbp160-2Mbp160pu

Table of Contents