Using Your Digital Audio Baby Monitor; Power On Or Off The Baby Unit; Power On Or Off The Parent Unit; Speaker Volume - Motorola MBP21 User Manual

3. Using Your Digital Audio Baby Monitor

Please read these instructions carefully, and be aware that this
digital audio baby monitor is only intended as an aid. It is not a
substitute for responsible and proper adult supervision.
3.1

Power on or off the Baby Unit

• Press and hold 0 to power on the baby unit. The Power indicator
will illuminate.
• Press and hold 0 again to power off the baby unit. The Power
indicator will extinguish.
3.2

Power on or off the Parent Unit

• Press and hold 0 to power on the parent unit. The Power/Link
indicator will illuminate.
• Press and hold 0 again to power off the parent unit. The Power/
Link indicator will extinguish.
NOTE
If you place the parent and baby units too close together, you may
hear a high pitched noise. This is not a fault. The units are designed
to be operated at some distance apart, e.g. in separate rooms, so
move the units further apart.
If the Power/Link indicator flashes on the parent unit, they are not
linked to each other. Make sure that both units are powered on, and
reduce the distance between the units, but not closer than 1 metre.

3.3 Speaker volume

You can adjust the speaker volume of the parent unit from Volume 1
to Volume 5, or turn it off.
• Press < or > on the parent unit when it is not in use.
Using Your Digital Audio Baby Monitor
11