I Nsta Ll Ati On; Tilt Adjustment - Acclaim Lighting Flood One EO Series User Manual

I NSTA LL ATI ON

When installing each Flood One EO fixture, ensure that the surface is level and that nothing
is protruding to damage the mounting yoke. Suitable mounting surfaces include steel,
aluminum, concrete or wood structures.
Each Flood One EO fixture is fitted with a swivel yoke mount, which has a center hole of
0.47" (12mm) and also two lock-off slots spaced at 6.3" (160mm) around the center line (see
page 13). The yoke has a thickness of 0.24" (6mm). Select bolts or screws (not supplied)
that fit the yoke holes correctly and are particularly suited to the mounting surface. Optional
tenon mounts and pipe clamps are available for mounting the fixture onto the top or sides
of poles respectively (see page 4).
TI LT ADJUSTM EN T
The yoke allows a tilt range of more than 180 degrees to be achieved. Use a 3/8" (10mm)
Allen wrench to adjust the tilt angle. A useful tilt gauge is provided at each end of the
fixture:
Read off the tilt
angle here
5
www.acclaimlighting.com