Detail Level Adjustment; Crispening Adjustment - Sony F35 Maintenance Manual

2. MSU menu operation:
. Touch panel operation
[Detail|2]
Adjustment Item: H/V Ratio
Specification: A ratio between H and V detail
amounts (white) to be added shall
be equal. (from 20 to 40)
V
3-3-2.

Detail Level Adjustment

Equipment: Waveform monitor (R, G, B)
Test Point: MONITOR HD SDI 1 or 2 connector
Object: Grayscale chart
Preparations
. Setting for MSU-900
DETAIL OFF button → ON (dark)
KNEE OFF button → OFF (lit)
. Shoot the grayscale chart so that the chart frame is
aligned with the underscanned monitor frame.
. Iris of the lens: A = 600 ± 20 mV
Adjustment Procedure
MSU menu operation:
. PAINT button → ON (lit)
. Touch panel operation
(Page 1/3) → [Detail] → [Detail|1]
Adjustment Item: Level
Specification: Adjust the detail level to be added to
each step of the grayscale for the
desired level.
3-8
3-3-3.
Equipment: Waveform monitor (R, G, B)
Test Point: MONITOR HD SDI 1 or 2 connector
Object:
Preparations
. Setting for MSU-900
DETAIL OFF button → ON (dark)
. Shoot the grayscale chart so that the chart frame is
H
aligned with the underscanned monitor frame.
. Iris of the lens: A = 600 ± 20 mV
Adjustment Procedure
1. Adjust the white balance.
2. Adjust the crispening level.
MSU menu operation:
. PAINT button → ON (lit)
. Touch panel operation
(Page 1/3) → [Detail] → [Detail|1]
Adjustment Item: Crispening
Specification:
A

Crispening Adjustment

Grayscale chart
WHITE button/MSU-900 → ON (lit)
Set Crispening to _99 once, and turn
slowly for increment until the noise at
the black level of the waveform just
decreases, or until an appropriate
crispening level is obtained.
A
F35