Description On Setup Menu - Sony F35 Maintenance Manual

3-1-5. Description on Setup Menu

Some of adjustments given in this section use the setup
menu. The setup menu consists of the following menus.
Besides there is a TOP menu indicating the entire configu-
ration of menu items.
. USER menu
. USER MENU CUSTOMIZE menu
. OPERATION menu
. PAINT menu
. MAINTENANCE menu
. NETWORK menu
. FILE menu
. DIAGNOSIS menu
. SERVICE menu
In this section, describes the setup menu operation as
follows.
For example:
When AUTO LEVEL in AUTO SETUP page of MAIN-
TENANCE menu is performed:
MENU: MAINTENANCE
PAGE: AUTO SETUP
ITEM: AUTO LEVEL
How to display the SERVICE menu
Press the VF MENU/DISPLAY button while pressing the
assignable buttons 1, 2, and 3 on the camera unit or the
assistant panel and the MENU SEL /ENTER dial.
The service menu is not displayed by turning off the
power.
n
Press the assignable buttons 1, 2, and 3 at the same time.
Preparations
Switching of the operation modes.
Display the TOP MENU.
Set the MENU to ON while pressing the MENU SEL/
ENTER dial.
MAINTENANCE menu
M01 <BASE SETTING> page
Select the SHOOT MODE to CUSTOM (Initial
setting: CINE)
PAINT menu
P03 <GAMMA> page
Select the TABLE to STANDARD 5(ITU-R709)
[Initial setting: USER1(S-LOG A)]
F35
How to change the setting values
To enter or cancel the setting value of items, which can be
changed by turning the rotary encoder (MENU SEL/
ENTER dial), proceed as follows.
To enter the setting value:
Press the rotary encoder.
To cancel the setting value:
Before pressing the rotary encoder, press the CAN-
CEL/STATUS button. The original setting is restored.
After the rotary encoder is pressed, the setting cannot
be canceled.
3-3