Automatic Adjustment; Video System Level Adjustment; H/V Ratio Adjustment - Sony F35 Maintenance Manual

3-2. Automatic Adjustment

To execute the automatic adjustment
1. MSU menu operation:
. MAINTENANCE button → ON (lit)
. Touch panel operation
[Auto|Setup] → [Auto|Level]
n
When performing automatic adjustment using the
menu of the camera, set the setup menu as follows.
MENU: MAINTENANCE
PAGE: AUTO SETUP
ITEM: AUTO LEVEL
2. When the adjustment is completed, the message
"Completed" will be displayed, and the camera
settings will be reset to the initial settings.
F35

3-3. Video System Level Adjustment

m
. Perform the video system level adjustment at the request
of the user.
The following setting is an example of adjustments of
each item for a standard camera.
. After adjustments described in Section 3-3 are complet-
ed, be sure to execute the reference file store. (Refer to
Section 3-3-11.)

3-3-1. H/V Ratio Adjustment

Equipment: Waveform monitor (R, G, B)
Test Point: MONITOR HD SDI 1 or 2 connector
Object: Grayscale chart
Preparations
. Setting for MSU-900
DETAIL OFF button → ON (dark)
KNEE OFF button → OFF (lit)
. Shoot the grayscale chart so that the chart frame is
aligned with the underscanned monitor frame.
. Iris of the lens: A = 600 ± 20 mV
Adjustment Procedure
1. MSU menu operation:
. PAINT button → ON (lit)
. Touch panel operation
(Page 1/3) → [Detail] → [Detail|1]
. Set each item as follows.
Level → 99
Limiter → 0
Crispening → _25
Level Dep → 25
A
3-7