Advertisement

Quick Links

JAZZ
7618
Installation &
Operating Instruction
( IMPORTANT : To be read and kept by the user )

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the JAZZ 7618 and is the answer not in the manual?

Questions and answers

Summary of Contents for CONVECTAIR JAZZ 7618

  • Page 1 JAZZ 7618 Installation & Operating Instruction ( IMPORTANT : To be read and kept by the user )
  • Page 3: Table Of Contents

     INTRODUCTION  Dear owner, Congratulations on the purchase of this premium electric heater. CONVECTAIR develops and produces the highest quality heating product in the electrical industry. To obtain the best results and the ultimate in performance and comfort, please take a moment to read the installation, operation and maintenance instructions detailed in this manual.
  • Page 4: Quick Start Guide

    8) Fast heat : Turn the heater on. Press on the key, the heater will run full power (2000 W) for the duration set on the timer. Troubleshooting : See page 12. To contact Convectair : See page 12.
  • Page 5: 1- Specifications

    - Minimum obstruction and designed to heat your room quietly, consistant heat, it is a perfect heater for your bathroom or other intermittently-used rooms. - Your JAZZ can be used with the optional CONVECTAIR Programmer Module (pilot wire) allowing scheduled temperature set-backs in periods of prolonged absence providing the same comfort and more savings.
  • Page 6: 3- Installation And Mounting

    Fig 3 12’’ «CAUTION : DO NOT INSTALL BOTTOM AT LESS (300 mm) THAN ’’ (750 MM) FROM THE FLOOR, SIDES 6’’ (150 mm) 6’’ AT LESS THAN 6’’ (150 MM) AND TOP LESS (150 mm) THAN 12’’ (300 MM)FROM ANY SURFACES». 20’’...
  • Page 7: 4- Electrical Connection

    - The purple wire with the seal at the extremity should not be used for the electrical connection. - The purple wire is used only if the heater is connected with the CONVECTAIR central programming system. - Fix the unit on the wall bracket before turning the power back on.
  • Page 8: 5- Operating Instructions

    OPERATING INSTRUCTIONS A- ON / Standby key B- Temperature setting keys C- Auto programming function 24H D- Timer function E- Backlit LCD screen F- Temperature display G- Locked controls indicator H- Heating indicator symbol - To turn the heater ON Press on the key on the control panel.
  • Page 9 - To use the «Timer » function Pressing the « » button triggers the «Timer » function for a period of 15 min (default). The red indicator lights. Successive presses on «-» and «+» allow to modify the duration between 5 and 90 min in steps of 5 min. Hold the « »...
  • Page 10 This device is intended for drying towels. Do not introduce anything in the unit. The rst time your CONVECTAIR heater is used, a light smoke could be re leased. This is normal and should disappear after about 2 to 3 minutes.
  • Page 11: 6- Overheat Control

    Do not insert small ob ects in the heater : this could cause an electrical short circuit, re or damage to the inner components. Any use or modi cations not approved by CONVECTAIR may cause electrical short circuits, re or in uries to the users.
  • Page 12: 8- Troubleshooting

    3- Activate the timer function. 4- If no heat is emitted, check the overheat protection (see section 6). 5- If the light is still off, and no heat is generated, call CONVECTAIR or the nearest CONVECTAIR service center. IDENTIFICATION OF YOUR HEATER IMPORTANT : PRODUCT INFORMATION APPEARS ON THE HEATER’S IDENTIFICATION...

Table of Contents

Save PDF