Jetter JC-3 Series Manual page 43

Jetter AG
MR 2819
MR 2820
MR 2821
Application-oriented manual – Control of alphanumeric HMIs (LCD) and printers
Property
Bit 7
Tab. 46: Disabling/enabling monitor functions
Display time for monitor functions
This module register contains the display time in multiples of 100 ms.
Property
Values
Value after reset
Takes effect
Tab. 47: Display time for monitor functions
Switch-over to monitor function screen
This module register configures the function of the ENTER ([↵]) key.
Property
Values
Tab. 48: Switch-over to monitor function screen
Dialog language
This module register configures the dialog language of the monitor function.
Property
Values
Takes effect
Tab. 49: Dialog language
Description
Displaying the input state permanently
0 = [=] key without monitor function
1 = [=] key with monitor function
Description
0 ... 65,535
35 (3.5 s)
Upon next switch-over to the monitor function screen
Description
0 Switching between monitor function screen
and default screen is enabled
1 Switching between monitor function screen
and default screen is disabled
Description
0 German
1 English
Next time the monitor function is launched
Control of alphanumeric HMIs | 3
43