Jetter AG
Male connector
specification
(controller end)
Female connector
specification
(HMI end)
Specifications of
connecting cable
Cable shielding
Application-oriented manual – Control of alphanumeric HMIs (LCD) and printers
2.6 Interface cable KAY_0533-0025
Interface cable assembly KAY_0533-0025 connects HMI models LCD 52,
LCD 54 and LCD-54Z to the controller.
Parameter
Type
Manufacturer
Item
Recommended core
cross section
Parameter
Type
Manufacturer
Recommended core
cross section
Category
Number of cores
Recommended core
cross section
Cable length
■
Complete, not paired
■
The shield must connect to the connector enclosures on both ends of the ca-
ble with the greatest possible surface area. Place the shield as follows:
– Bundle the shielding.
– Clamp it under a strain relief.
– Wrap it with copper foil.
Description
8-pin male MiniDIN connector
KYCON
KMDLA - 8P
2
0.051 mm
... 0.128 mm
Description
15-pin female Sub-D connector in metallized hous-
ing (quality grade 3)
Various manufacturers
2
0.128 mm
... 0.25 mm
Description
6
2
0.14 mm
0.25 m
Connecting alphanumeric HMIs | 2
2
2
15