Table of Contents
Advertisement
Jetter AG
MR 2824
Application-oriented manual – Control of alphanumeric HMIs (LCD) and printers
Number
Part
9, 10
Serial interface
11
Serial interface mod-
ule
Tab. 50: Device number summary
4.2.1 Register description
Device number of the default device
This module register contains the device number of the default device. If you al-
ways specify the default device in the application program (device number = 0),
you can select during runtime which device is to be used.
Property
Values
Value after reset
Tab. 51: Device number of the default device
Description
Output to the user-programmable serial
interface of the controller
Output to a serial interface module on
theJX2 or JX3 system bus
Description
1 ... 11
2
Controlling printer and serial interfaces | 4
46
Advertisement
Table of Contents
