Table of Contents
Advertisement
Jetter AG
MR 2808
MR 2811
MR 2813
MR 2815
Application-oriented manual – Control of alphanumeric HMIs (LCD) and printers
Setting the suggested value
MR 2815 defines the suggested value for the STX UserInput() command.
The controller displays the suggested value for the STX UserInput() com-
mand using the same format settings as for displaying numerical values.
3.7.3 Register description
Number of decimal places entered with UserInput
This module register contains the number of decimal places entered by the user.
Property
Values
Tab. 30: Number of decimal places entered with UserInput
Setting the maximum number of decimal places for UserInput
This module register contains the maximum permissible number of decimal
places for inputting numericals.
Property
Values
Value after reset
Takes effect
Tab. 31: Number of decimal places for UserInput
Field length for UserInput
This module register contains the length of the input field.
Property
Values
Value after reset
Takes effect
Tab. 32: Field length for UserInput
Suggested value for UserInput
This module register contains the suggested value to be displayed after the STX
UserInput() command was executed, and the clear key [C] was pressed.
Property
Values (Int)
Values (Float)
Type
Takes effect
Tab. 33: Suggested value for UserInput
Description
0 ... [MR 2811]
Description
1 ... 12
11
Upon next execution of STX UserInput() command
Description
1 ... 12
11
Upon next execution of STX UserInput() command
Description
-2,147,483,648 ... 2,147,483,647
-38
+/-(1.2x10
... 3.4x10
Int or Float depending on the value most recently written
Upon next execution of STX UserInput() command
Control of alphanumeric HMIs | 3
38
)
32
Advertisement
Table of Contents
