Entering Numerical Values - Jetter JC-3 Series Manual

Jetter AG
MR 2816
Flag 2060
STX command
Entered value format
Application-oriented manual – Control of alphanumeric HMIs (LCD) and printers
Sign option for DisplayValue
The value in this module register specifies which one of two text strings is to be
output.
Property
Values
Takes effect
Tab. 22: Sign option for DisplayValue
Numerical value format for DisplayValue
Flag 2060 sets the numerical format.
Property
Values
Takes effect
Tab. 23: Numerical value format for DisplayValue

3.7 Entering numerical values

To enter register and variable contents via HMI, use the following STX command:
■
UserInput()
INFO
Limitations
The following limitations apply to the STX UserInput()
command:
■
■
The format of numerical values to be entered can be adjusted to suit application
needs. To do so, use the following parameters:
■ Input field length
■ Maximum number of decimal places
■ Suggest value
Description
0 Sign will be displayed
1 Sign will not be displayed
Upon next execution of STX DisplayValue() com-
mand
Description
0 Decimal
1 Hexadecimal
Upon next execution of STX DisplayValue() com-
mand
While inputting numerical values, the keys used for this
are not mapped to the key flags.
The STX UserInput() command is not executed by the
controller for as long as the monitor function is active.
Control of alphanumeric HMIs | 3
28