Table of Contents
Advertisement
Jetter AG
Cable specification
Male connector
specification
(controller end)
Male connector
specification
(HMI end)
Application-oriented manual – Control of alphanumeric HMIs (LCD) and printers
Number
Part
1
Terminal X11
2
Shield
3
Power supply
4 ... 7
Terminals
The following minimum requirements apply to cable sets:
Parameter
Core cross-sectional area
Maximum cable length
Shield
2.4 Interface cable assembly no. 192 xM
The interface cable assembly 192 xM connects the following types of HMIs to the
controller:
■
LCD 16
■
LCD 23
■
LCD 25
■
LCD 27
■
LCD 34
■
LCD 110
Parameter
Type
Manufacturer
Item
Recommended core
cross section
Parameter
Type
Manufacturer
Recommended core
cross section
Description
Serial interface of the controller
Use shielded cables both ends of
which are connected to the metallized
housing of the connector.
In a multi-display setup, each HMIs
requires individual power supply.
HMI interfaces
Description
2
0.14 mm
100 m
Complete, not paired
Description
8-pin male MiniDIN connector
KYCON
KMDLA - 8P
2
0.051 mm
... 0.128 mm
Description
15-pin male SUB-D connector in metallized hous-
ing (quality grade 3)
Various
2
0.128 mm
... 0.25 mm
Connecting alphanumeric HMIs | 2
2
2
11
Advertisement
Table of Contents
