Chamberlain CSL24U Installation Manual page 48

STEP 6 continued...
SOLAR PANEL(S)
INSTALL THE SOLAR PANEL
1. Position solar bracket on mounting surface. Mark and drill holes.
2. Insert two bolts into the track located on the back of the solar
panel(s).
3. Slide bolts in track away from bolt hole and align both bolts.
4. Secure solar panel(s) to solar bracket using two washered nuts.
5. Secure solar panel(s) assembly to mounting surface using appropriate
hardware.
WIRE THE SOLAR PANELS
Solar panel applications require the Solar Harness Kit model K94-37236 (refer to Accessories).
7AH BATTERY APPLICATION
J15 Plug
(Solar Harness Kit,
Model K94-37236)
Diode
Jumper
7AH Batteries
Proceed to the Dual Gate section (if applicable) or proceed to the Adjustment section.
Red (+)
20W
20W
Black (-)
40W solar
panel
installation
60W solar panel
installation
APPENDIX APPENDIX
Mounted Panel
Must Face South
10W
Jumper
10W
33AH Batteries
46
Mounting Surface
Mounting Surface
33AH BATTERY APPLICATION
J15 Plug
(Solar Harness Kit,
Model K94-37236)
Diode
40W solar
panel
installation
60W solar panel
Red Wire (+)
20W 10W
20W
10W
Black (-)
installation