Changing The Selections After; Programme Has Started; Child Lock - Grundig GWN 47430 CB User Manual

5.15

Changing the selections after

programme has started

Adding laundry after the programme has
started:
When the Start / Pause
pressed, if the water level inside the
machine is appropriate, the door
symbol flashes on the display until it
is opened and dims when the door is
opened.
When Start / Pause
if the water level inside the machine is
not appropriate, then the door symbols
stays on.
Switching the machine to pause mode:
Press Start / Pause
the machine, a wait symbol will start
flashing on the display.
Changing the programme selection after
programme has started:
The programme change is not allowed
when the current programme is
running.
You can select the new programme
after switching the current programme
to standby.
C
The selected program starts anew.
button is
button is pressed,
button to pause
Changing the auxiliary function, speed
and temperature
Depending on the step the programme
has reached, you can cancel or activate
the auxiliary functions; , "Auxiliary
function selection".
You can also change the speed
and temperature settings; , "Spin
speed selection" and "Temperature
selection".
C
The loading door will not open
if the water temperature in the
machine is high or the water level
is above the door opening.
5.16

Child Lock

Use Child Lock function to prevent
children from tampering with the
machine. Thus you can avoid any
changes in a running programme.
C
You can switch on and off the
machine with
when the Child Lock is active.
When you switch on the machine
again, programme will resume
from where it has stopped.
C
If you press any button when
the Child Lock is activated,
the machine will give an audio
warning. No audible warning will
be made when the buttons are
pressed 5 times in a row.
To activate the Child Lock:
Press and hold
button for 3 seconds. After the
countdown as
"CL 3-2-1"
is over "Child Lock Enabled" appears
on the display. You can release the
Auxiliary Function
warning is displayed.
To deactivate the Child Lock:
Press and hold
button for 3 seconds. After the
countdown as
"CL 3-2-1"
is over "Child Lock Enabled" symbol
turns off.
On / Off
button
1 Auxiliary Function
st
on the display
button when this
1 Auxiliary Function
st
on the display
EN
1
st
31