Error Display - Toshiba RC-DX10H Instruction Manual

Problem
The cooker makes noises
while in use.
There is a smell of plastic,
etc.
There is a gap between
the outer lid and the
main body
The coating on the outer
surface of the inner pot is
scratched or dirty
Sparks come out of the
power plug
The circuit breaker is
tripped during cooking.

Error display

Press the OFF key and unplug the power plug (power supply side) from the electrical outlet, and take the following
action.
• Remove dust from the air inlet / outlet at the bottom part of the
main body.
• Do not use the rice cooker when placed on a soft surface such
as paper, cloth, carpet, plastic bags etc., or in a place where the
air inlet / outlet is blocked.
• Remove foreign objects such as rice grains adhered to the outer
bottom part of the inner pot and the pot temperature sensor.
• Has too much water been added ? (Reduce the amount of
water)
• Are you using the same outlet together with another
appliance?
→ Use a 220 V AC outlet with a rating of 10 A or more. Do not
• This error is displayed so that the parts may not be damaged by
high voltage.
to
Causes/what to check
• See "Sounds while in use" on page 35.
• The cooker may smell at first, but the smell will decrease with use.
→ If you are worried about the smell, ventilate the room or clean the cooker by
boiling. (See page 25)
• There is a gap between the outer lid and the main body but it is sealed with the
inner lid packing. Although the gap may be widened due to application of
pressure during cooking, it is not a problem.
• The coated outer surface of the inner pot may become scratched or dirty with use.
You can use the cooker to cook rice and keep it warm without any problems.
• Small sparks are sometimes generated when plugging or unplugging the power
plug. This is inherent to the IH (induction heating) method and is not a
malfunction.
• If you use the cooker together with other electrical appliances at the same time,
electricity use may exceed the rating and trip the breaker. Do not share the
electrical outlet used for the cooker with other appliances.
share the outlet with other appliances.
• These displays indicate malfunctions of the PCB, temperature sensor, etc.
→ Contact the store from which the product was purchased.
(reference page)
Resetting the display
After taking the
recommended action,
plug in the power plug,
then press
(Error display is reset)
Resume the operation
after cooling down the
inside of the body, inner
pot and inner lid to body
temperature.
41