Technical specifications
Article number
Output delay with resistive load
"0" to "1", typ.
•
"1" to "0", typ.
•
for technological functions
–
"0" to "1", typ.
–
"1" to "0", typ.
Parallel switching of two outputs
for logic links
•
for uprating
•
for redundant control of a load
•
Switching frequency
with resistive load, max.
•
with inductive load, max.
•
on lamp load, max.
•
Total current of the outputs
Current per module, max.
•
Cable length
shielded, max.
•
unshielded, max.
•
Interfaces
Number of PROFINET interfaces
Number of PROFIBUS interfaces
Number of USB interfaces
Number of DRIVE-CLiQ interfaces
1. Interface
Interface types
Number of ports
•
integrated switch
•
RJ 45 (Ethernet)
•
Protocols
IP protocol
•
PROFINET IO Controller
•
PROFINET IO Device
•
SIMATIC communication
•
Open IE communication
•
Web server
•
Media redundancy
•
76
6ES7615-4DF10-0AB0
100 µs; For X122/X132; at 48 ohm load
150 µs; For X122/X132; at 48 ohm load
1 µs; For X142
1 µs; For X142 as a high-speed output; 150 µs for standard output
Yes; For technological functions and high-speed outputs: No
No
Yes; For technological functions and high-speed outputs: No
35 kHz; With High Speed output, 1 kHz with standard output
2 Hz; Max. 1 J per channel
11 Hz
8 A
30 m
30 m
3
1
2; USB 3.0 (without function)
4; DRIVE-CLiQ interfaces (24 V / 450 mA per interface for connecting
encoders/measuring systems)
3
Yes
Yes; X150
Yes; IPv4
Yes
Yes
Yes
Yes
Yes
Yes; MRP Automanager according to IEC 62439-2 Edition 2.0
6ES7615-7DF10-0AB0
SIMATIC Drive Controller
Equipment Manual, 11/2019, A5E46600370-AA