Siemens SIMATIC S7-1500 Manual page 61

Connecting
3.6 Wiring and block diagrams
Wiring rules
Neither ring wiring nor double wiring of components is permitted in the DRIVE-CLiQ wiring.
In the case of a Motor Module, you must connect the power cable to the motor and the
associated encoder.
Further information
You can find more information on DRIVE-CLiQ wiring in the following:
● SIMATIC Drive Controller
(https://support.industry.siemens.com/cs/ww/en/view/109766665) system manual, section
"Connecting"
● SINAMICS S120 Drive Functions
(https://support.industry.siemens.com/cs/us/en/view/109754299) function manual, section
"Rules for wiring with DRIVE-CLiQ"
60
SIMATIC Drive Controller
Equipment Manual, 11/2019, A5E46600370-AA