Head Latch Adjustment - SATO CL608 Service Manual

5-9 Head Latch Adjustment

The set-screws which attach the head latches to the latch shaft, can become loosened
during the operation of your printer. If you notice light printing on the left side of
your labels, check the pairs of set-screws to be sure they are securely tightened.
Pairs of set-screws on
each end of shaft must
be tightened to avoid
slippage of media and
light printing on the left
side of the labels
Page 5-14
SECTION 5 – Mechanical Adjustments
LATCHED
POSITION
UNLATCHED
POSITION
SATO CL608 & CL612 SERVICE MANUAL PN 9001024
Rev. B Jan. 2000