Digital Aux In 3; Digital Aux In 4 - Emerson VILTER MicroVission Operation And Service Manual

Section 6 • Alarms and Trips
Warnings
Not Running (Idle)

Digital Aux In 3:

Below messages will be displayed when Digital Aux In 3 satisfy safety conditions.
Warnings are displayed in IDLE condition and it is monitored under Inhibit Checkbox (Refer Figure 6-4).
When "None" is selected in Trips/Alarm then No Alarm and Trip for Digital Aux In 3 is monitored, Similarly When
"None" is selected in Inhibit then No Warning and Inhibit for Digital Aux In 3 is monitored.
Digital Aux In 3 Warning
Inhibit Checked and
"Start Inhibit if ON" and
Digital Aux In 3 is HIGH
Inhibit Checked and
"Start Inhibit if OFF" and
Digital Aux In 3 is LOW

Digital Aux In 4:

Below messages will be displayed when Digital Aux In 4 satisfy safety conditions.
Warnings are displayed in IDLE condition and it is monitored under Inhibit Checkbox (Refer Figure 6-4)
When "None" is selected in Trips/Alarm then No Alarm and Trip for Digital Aux In 4 is monitored, Similarly When
"None" is selected in Inhibit then No Warning and Inhibit for Digital Aux In 4 is monitored.
Digital Aux In 4 Warning
Inhibit Checked and
"Start Inhibit if ON" and
Digital Aux In 4 is HIGH
Inhibit Checked and
"Start Inhibit if OFF" and
Digital Aux In 4 is LOW
MicroVission Controller • Operation and Service Manual • Emerson • 35391MV 1.3
Inhibits
Pre-Start
Digital Aux In 3 Inhibit
Inhibit Checked and "Start Inhibit
if ON" and Digital Aux In 3 is
HIGH
Inhibit Checked and "Start Inhibit
if OFF" and Digital Aux In 3 is
LOW
Digital Aux In 4 Inhibit
Inhibit Checked and "Start Inhibit
if ON" and Digital Aux In 4 is
HIGH
Inhibit Checked and "Start Inhibit
if OFF" and Digital Aux In 4 is
LOW
Alarms
Running
Digital Aux In 3 Alarm
Trip/Alarm Checked
and "Alarm if ON" and
Digital Aux In 3 is HIGH
Trip/Alarm Checked
and "Alarm if OFF" and
Digital Aux In 3 is LOW
Digital Aux In 4 Alarm
Trip/Alarm Checked
and "Alarm if ON" and
Digital Aux In 4 is HIGH
Trip/Alarm Checked
and "Alarm if OFF" and
Digital Aux In 4 is LOW
Trips
Running
Digital Aux In 3 Trip
Trip/Alarm Checked and
"Trip if ON" and Digital
Aux In 3 is HIGH
Trip/Alarm Checked and
"Trip if OFF" and Digital
Aux In 3 is LOW
Digital Aux In 4 Trip
Trip/Alarm Checked and
"Trip if ON" and Digital
Aux In 4 is HIGH
Trip/Alarm Checked and
"Trip if OFF" and Digital
Aux In 4 is LOW
6 – 15