Emerson VILTER MicroVission Operation And Service Manual page 48

Section 4 • Menu Screen
Configuration
Navigates to Configuration screen where the operator
can configure all the initial system parameters.
Data Backup
Navigates to the Data Backup screen where the opera-
tor can back up setpoints, configuration parameters and
calibration settings to a USB memory device. In addition,
this allows the restoration of previously saved database
files.
Compressor Sequencing
Navigates to the Compressor Sequencing screen where
the operator can set-up compressor to sequence up to
nine other compressors. This option will be only avail-
able when Compressor Sequencing option is enabled
from Configuration Screen Page 3.
4 – 2
Auxiliary IO
Navigates to the Auxiliary IO screen where the operator
can set-up 4 Auxiliary Digital Inputs, 4 Auxiliary Digital
Outputs, 8 Auxiliary Analog Inputs and 5 Auxiliary
Analog Outputs. Auxiliary IO option is enabled from
Configuration Screen When any of the auxiliary is
enabled.
Condenser Control
Navigates to the Condenser Control screen where the
operator can set-up Condenser Control Run Mode,
Setpoints, Condenser VFD, Condenser Step Control
and Profile. This option will be only available when
Condenser Control option is enabled from Configuration
Screen Page 2.
Main
Navigates back to the Main screen.
MicroVission Controller • Operation and Service Manual • Emerson • 35391MV 1.3