Bluetooth Connection - Vankyo Performance 700 W User Manual

Screen Casting
1. Connect your mobile device and the projector to the same router's Wi-Fi.
2. Go the Homepage, then select Input Source, then select MULTISCREEN as the input
source to enter the cast interface.
3. Select DLNA to enter the following interface.
4. Launch a video player App on your mobile and select a video to play.
5. Tap to search for the projector.
6. Select V700W-XXXX-(dlna) to connect.
7. The contents on your device will be casted on the wall / screen.
Note: When you cast a video from your mobile device, the video will be only displayed
on the projected screen and you can still use your mobile device without interrupting
the video or showing any of your other content.

Bluetooth Connection

1. Use as a Bluetooth Speaker
You can connect to your mobile device with this projector via Bluetooth connection and
use it as a Bluetooth speaker.
Step 1: Press the power button to enter the interface shown below, then press right
button to change to the amplifier mode.
16