EverFocus KS-VM164 Operating Instructions Manual page 68

[READ THIS CAREFULLY
[----------------------------]
[ If a new password
[ inserted and forgotten
[ this setup procedure
[ will be unaccessible
[ and the system locked.
[
[
[ Procede to change pwd?
[ ENTER.Yes
[ CLEAR.No
[VIDEO MASK
[----------------------------]
[
[ Camera no.1
[
[
[
[
[INC/DEC.Camera Change
[ENTER.Show/Change
[
[SEQ.End
[ **********
[ **********
[ **********
[ **********
[ **##******
[ **##******
[
[ CAMERA 1 ]
[ ---------]
[ 1←→2 3↕4 ]
Enter ◄ ►]
[
[ SEQ. End ]
6.1]
Change password submenu
is ] Entering the change setup password submenu will show a warning message
]
on the screen, shown on the screen to the left. Be very careful because if a
]
password setting is lost it will be necessary to contact the supplier to reset the
]
whole system and all the data will be lost.
]
]
]
The instructions for changing the password are shown on the screen.
]
]
]
7]
Masking submenu
] Masking is a system for hiding part of the image when this comes from fixed
]
cameras. If part of the image supplied by the camera is to be covered it should
]
be masked.
]
Choose the camera to be masked using
]
]
preset mask and modify it if necessary. A typical screen is shown in the
]
following example.
]
]
]
]
Submenu for Masking: modify
]
] The example on the left * shows the current mask for camera 1, # indicates the
]
cursor, which can be shifted using the left
]
]
keys, or by moving the joystick if the matrix is controlled by a KS KBJ
]
keyboard.
Press to mask /remove the mask under the cursor.

Pressing the

video signal.
Press and

confirms the changes made to the masks of the various input videos.

key twice quickly will completely remove the mask on the
to select another input video.

Pag. 28
and . Press
  
right up,
, , 
MNECKSVM164_0350
to view the
down
