Table of Contents
Advertisement
Available languages
Available languages
[CYCLE SEQUENCES
[----------------------------]
[ 1. Day seq,
Output 1
[ 2. Day seq,
Output 2
[ 3. Day seq,
Output 3
[ 4. Day seq,
Output 4
[ 5.Night seq, Output 1
[ 6.Night seq, Output 2
[ 7.Night seq, Output 3
[ 8.Night seq, Output 4
[
[SEQ.End
[CYCLE SEQUENCES
[----------------------------]
[ 1.Output 1
[ 2.Output 2
[ 3.Output 3
[ 4.Output 4
[
[
[
[
[
[SEQ.End
[OUTPUT 1
[----------------------------]
[Step: Cam Time
[ > A:
1
2
[
B:
2
2
Step:
[
C:
3
2
INC.Previous ]
[
D:
4
2
DEC.Next
[
[----------------
[1..16.Camera
[ENTER/CLEAR.Change Time
[SEQ.End
[ID TEXTS
[----------------------------]
[Cam
Text
[
[>1
Text O1
[ 2
Text O2
[ 3
Text O3
[ 4
Text O4
[ 5
Text O5
[
[INC.Previous DEC.Next
[ENTER.Modify
SEQ.End
3]
Cycle sequences submenu (night-time and daytime)
]
The cycle sequences submenu may be shown in different formats, depending
]
on whether night-time sequences have been enabled and on the number of
]
output videos the matrix has.
]
Night-time video sequences are only present if their use has been enabled. If
]
]
not a simplified menu is shown as in the next section.
]
Press
...
]
]
return to the main menu. (See section 4.1.2)
]
3]
Cycle sequences submenu (only daytime)
]
If the night-time sequences are not used (a single sequence is used for each
]
output for the complete 24-hour day, without differences for working days and
]
holidays) a simplified menu is shown.
]
Press
...
]
]
menu. (See section 4.1.2)
]
]
]
]
3.1]
Sequence Modify submenu
]
Each cycle sequence consists of a max. of 16 steps, each of which is defined
]
by an input video to be viewed, and by the viewing time in seconds. The
]
screen shows only 4 steps at a time while the others can be requested by
pressing
and
]
]
The cursor > indicates the step being modified: press the desired camera
]
number, and increase/decrease the viewing time with
]
]
When sequence definition is complete, press
]
previous menu.
4]
Identification text submenu
]
Each input video is identified by a text string with max. 28 characters. The
]
cursor > indicates the active text, which can be modified. Press
]
]
choose the text to be modified,
]
main menu.
]
]
]
]
]
to proceed with switching sequence modification, or
to select the desired sequence or
.
to make the change or
Pag. 26
to return to the main
/
.
to confirm and return to the
/
to return to the
MNECKSVM164_0350
to
to
Advertisement
Chapters
Table of Contents
