EverFocus KS-VM164 Operating Instructions Manual page 48

3.3 Switching on and off
Before connecting to the power supply:
• Make sure the supplied material corresponds to the required specifications by examining the identification
plates as described in section 1.5 Identification Data
• Make sure the matrix and other components of the system are closed properly so that there is no possibility
of direct contact with live parts
• The matrix and other devices in the system should rest on a large, solid base.
• The power supply cables should not get in the way of the installer technician when he is carrying out normal
operations
• Make sure the power outlet and extension cables, if used, are sufficient for the system power consumption.
SWITCHING ON: insert the power supply plug in the power outlet and connect the corresponding jack
to the matrix connector labelled 12VDC. The front side led must be lighted.
SWITCHING OFF: remove the external power supply plug from the power outlet and disconnect the
jack from the matrix.
Pag. 8 MNECKSVM164_0350