Electrical Requirements - KitchenAid 5KEK1701A Owner's Manual

Table of Contents

Advertisement

27. To disconnect, turn any control to off, then remove plug from
wall outlet.
28. Allow the appliance to cool completely before putting on or
taking off parts, and before cleaning the appliance.
29. Refer to the "Care and Cleaning" section for instructions on
cleaning the surfaces in contact with food.
30. Scalding may occur if the Lid is removed during the brewing
cycle.
31. This appliance is intended to be used in household and similar
applications such as:
■ staff kitchen areas in shops, offices and other working
environments;
■ farmhouses;
■ by clients in hotels, motels and other residential type
environments;
■ bed and breakfast type environments.
SAVE THESE INSTRUCTIONS
For complete details on product information, instructions and
videos, including Guarantee information, visit
www.kitchenaid.com.au or www.KitchenAid.co.nz.

ELECTRICAL REQUIREMENTS

Plug into an earthed outlet.
Do not remove earth prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions can result in death, fire, or
electrical shock.
Power: 2000-2400 W
Voltage: 220-240 VAC
Frequency: 50-60 Hz
NOTE: The Water Kettle has a earthed plug. To reduce the risk of electrical shock, this plug will
fit in an outlet only one way. If the plug does not fit in the outlet, contact a qualified electrician.
Do not modify the plug in any way.
4
WARNING
Electrical Shock Hazard

Advertisement

Table of Contents
loading

Table of Contents