Electrical Requirements - KitchenAid Pro Line KEK1522OB Manual

WATER KETTLE SAFETY
14. Do not clean Water Kettle with abrasive cleaners, steel wool, or other
abrasive materials.
15. This product is designed for indoor household use only. Not designed
for commercial use.
16. Do not overfill Water Kettle.
17. To disconnect, turn any control to "off," then remove plug from wall outlet.
18. Scalding may occur if the lid is removed or opened during the brewing cycles.
SAVE THESE INSTRUCTIONS

Electrical requirements

WARNING
Electrical Shock Hazard
Plug into a grounded 3 prong
outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these
instructions can result in
death, fire, or electrical shock.
Volts: 120 V.A.C.
Hertz: 60 Hz
NOTE: The Water Kettle has a 3 prong
grounded plug. To reduce the risk of
electrical shock, this plug will fit in an outlet
only one way. If the plug does not fit in the
outlet, contact a qualified electrician. Do not
modify the plug in any way.
Do not use an extension cord. If the power
supply cord is too short, have a qualified
electrician or serviceman install an outlet
near the appliance.
A short power supply cord (or detachable
power supply cord) should be used to reduce
the risk resulting from becoming entangled in
or tripping over a longer cord.
Longer detachable power supply cord or
extension cords are available and may be
used.
If a longer detachable power supply cord or
extension cord is used:
- The marked electrical rating of the cord
set or extension cord should be at least
as great as the electrical rating of the
appliance.
- If the appliance is of the grounded type, the
extension cord should be a grounding-type
3-wire cord.
- The cord should be arranged so that it will
not drape over the countertop or tabletop
where it can be pulled on by children or
tripped over unintentionally.
5