Danfoss CS10 Technical Information page 12

Technical Information
PLUS+1® CS10 Wireless Gateway
Configuration
12 | © Danfoss | November 2020
On the WiFi Connection page, the status of the configured access point is shown in the section AP
status.
Enable/Disable activates/deactivates the Access point unit of the device manually, the actual status is
indicated by the LED AP enabled.
A list of the devices connected to the access point is provided in the section Connected clients.
The number of clients is shown in the field Amount. In the field Index the device at this index in the list is
shown when applying the GoToIndex button. The MAC address and IPv4 address are then shown in the
corresponding fields.
BC356772124151en-000102