Warning Labels - Hitachi L-8900 Service Manual

Warning Labels

The following Warning Labels are attached to Model L-8900 High Speed Amino Acid Analyzer.
Read the Labels carefully, check the contents on the actual Labels.
Check these Labels sometimes, clean and maintenance them so that they can be read well from a safe distance.
If the Label is deteriorated to read unclearly, contact our Service office to replace.
WARNING
AUTOSAMPLER MOVING
Can cause hand injury due to needle or
moving mechanism.
Don't put your hand into autosampler
while running.
852-8307
WARNING
BIOLOGICAL HAZARD
Sticking of waste solution to your body
can cause contagion.
Don't touch a sample without protective
device.
If waste solution sticks to your body,
wash it off immediately and disinfect
the affected area, then consult with a
physician. 852-8300
WARNING
BIOLOGICAL HAZARD
Sticking of waste solution to your body
can cause contagion.
Don't touch a sample without protective
gloves.
If waste solution sticks to your body,
wash it off immediately and disinfect
the affected area, then consult with a
physician. 852-8301
WARNING
BURSTING
Can cause injury if a sample container
(made of glass or polyethylene) bursts
due to cracks.
Before applying pressure to a sample
container by means of N gas, check for
2
cracks and be sure to put the container
in the protective cover. 852-8305
SAFETY SUMMARY
NOTICE
Damages of Needle by Mismounting of
Sample Rack
Measurement is disabled if the needle is damaged.
Be sure to mount the sample rack to the correct
position so that it does not move back and forth in
the instrument.
890-9712
NOTICE
注 意
Damages to Gears of Syringe Moving
Mechanism
Be careful not to damage gears of syringe moving
mechanism.
Measurement is disabled if gears of syringe moving
mechanism are damaged.
Never move hook of syringe moving mechanism
forcedly while autosampler is turned on. 890-9702
CAUTION
HOT COLUMN OVEN
Can cause burns.
The column oven is hot.
Before accessing the column oven for
column replacement, etc., make sure the
temperature indication on display is lower
than 55 °C.
852-8303
CAUTION
HOT COLUMN OVEN
Can cause burns.
The column oven is hot.
Before accessing the column oven for
column replacement, etc., make sure the
temperature indication on display is lower
than 55 °C.
852-8304
CAUTION
HOT LAMP AND COVER
Can cause burns.
The light source lamp and its cover are
hot.
Before lamp exchange, wait 20
minutes after turning off instrument
power supply and make sure the lamp
and its cover are cooled.
852-8302
WARNING
HAZARDOUS VOLTAGE
Can cause death or serious injury
through electric shock.
Ground properly.
Don't remove the covers of instrument.
Only service engineers are allowed to
remove the covers.
SAFETY - 15
852-8306