Table of Contents
Advertisement
ABB i-bus
®
KNX
Safety
2
Safety
2.1
General safety instructions
► Protect the device from moisture, dirt and damage during transport, storage and operation.
► Operate the device only within the specified technical data.
► Operate the device only in a closed housing (distribution board).
► Mounting and installation must be carried out only by qualified electricians.
► Disconnect the device from the supply of electrical power before mounting.
2.2
Proper use
The product must be installed centrally in an electrical distribution board.
The device is a modular installation device for quick installation in distribution boards on 35 mm mounting
rails according to EN 60715.
SU/S 30.640.2 | 9AKK107992A4580_EN Rev. A 7
Advertisement
Table of Contents
