Table of Contents
Advertisement
Insert all screws of the 4 transport
3.
locks and tighten slightly.
Insert the mains connection cable
4th
into the holder and remove all 4
Tighten the screws of the transport
locks with an SW13 wrench .
Insert the hose into the holder.
5.
Transport, storage and disposal de
20.3 Put the device into
operation again
Remove the transport locks
▶
nen.
20.4 Dispose of the old device
Valuable raw materials can be
reused through environmentally
friendly disposal.
WARNING
Risk of damage to health!
Children can lock themselves in the
device and endanger their lives.
The device is not behind a door
▶
that blocks or prevents the
appliance door from opening.
For disused devices the
▶
Unplug the power cord, then cut
through the power cord and
destroy the lock on the appliance
door to such an extent that the
appliance door no longer closes.
Pull out the plug of the power
1.
cord.
Cut through the power cord.
2.
Dispose of the device in an environmentally friendly
3.
manner.
You can obtain information on
current disposal routes from your
specialist dealer and from your
local authority.
This device corresponds
to the European
Directive 2012/19 / EU
Via electrical and electronic
appliances (waste
73
Advertisement
Table of Contents
