Table of Contents
Advertisement
de Cleaning and care
Loosen the hose clamp and
3.
carefully pull off the water
drainage hose.
Residual water can run out.
Clean the water drainage hose
4th
and the siphon socket.
5.
58
18.8 Clean the filter in the
water inlet
Empty the water inlet hose
In order to be able to clean the sieve,
first empty the water inlet hose.
Turn off the tap.
1.
The program cotton to adjust.
2.
Start the program and let it run for
3.
about 70 seconds.
Switch off the device.
4th
Disconnect the device's power plug
5.
from the power supply.
Clean the strainer on the tap
Note: Note the information on
security
→
page 4 and avoid damage to property.
the → Page 11, to use your device
safely.
Pre-condition: The water inlet hose
is empty.
Remove the water inlet hose
1.
from the tap.
Advertisement
Table of Contents
