Bosch WAV28K43 Instructions For Use And Assembly page 67

disturbance
High spin speed
number is not
reached.
Spin program
does not start.
Rustling, zi-
screeching sound.
Longer, whirring one
Noise before the start
of washing or
Fabric softener.
Short, whirring
noise after switching on
the device.
Loud noises
rend of skidding.
Cause and troubleshooting
The unbalance control system compensates for unbalance
by reducing the spin speed.
Redistribute the laundry in the drum.
▶
Note: Place large and small items of laundry together
in the drum. Laundry items of different sizes are
better distributed during spinning.
Start the program Sling.
▶
The drain pipe or water drainage hose is blocked.
Clean the drain pipe and water drain
▶
running hose.
The drain pipe or water drainage hose is kinked or
pinched.
Make sure the drain pipe and the
▶
The water drainage hose is not kinked or trapped.
The unbalance control system has stopped spinning
due to uneven distribution of the laundry.
Redistribute the laundry in the drum.
▶
Note: Place large and small items of laundry together
in the drum. Laundry items of different sizes are
better distributed during spinning.
Start the program Sling.
▶
Water is rinsed into the detergent drawer under
pressure.
Not a fault - normal operating noise.
▶
Intelligent dosing system doses detergent or care
products.
Not a fault - normal operating noise.
▶
Intelligent dosing system carries out a function test.
Not a fault - normal operating noise.
▶
Device is not aligned correctly.
Align the device
▶
The feet of the device are not fixed.
Fix the device feet. Align the device
▶
Transport locks are not removed.
Remove the transport locks
▶
Troubleshooting de
67