Table of Contents
Advertisement
de Troubleshooting
disturbance
Program starts
not.
Door cannot be opened
nen.
The detergent solution does not come out. Drain pipe or water drainage hose is blocked.
pumped out.
64
Cause and troubleshooting
Note: You can start the washing program if you
deactivate the intelligent dosing system and dose
manually.
→ "Keys", page 25
is activated.
Continue the program by pressing Sluice
▶
change or Pumping out choose and Start / reload
to press.
→
"Continuing the program at Rinse Hold", page 43
Temperature is too high.
Wait until the temperature has dropped.
▶
→ " Abort program ", page 43
▶
The water level is too high.
Start the program Pumping out.
▶
Power failure.
Open the door with the emergency release.
▶
→
"Emergency release", page 72
Clean the drain pipe and water drain
▶
running hose.
The drain pipe or water drainage hose is kinked or
pinched.
Make sure the drain pipe and the
▶
The water drainage hose is not kinked or trapped.
The drain pump is blocked.
→ " Cleaning the drain pump ", page 54
▶
is activated.
Continue the program by pressing Sluice
▶
change or Pumping out choose and Start / reload
to press.
→
"Continuing the program at Rinse Hold", page 43
The water drainage hose is connected too high.
Mount the water drainage hose in maxi-
▶
times 1 meter in height.
Pump cover is not assembled correctly.
Assemble the pump cover correctly.
▶
Detergent dosage is too high.
Advertisement
Table of Contents
