KROHNE Display and adjustment module for OPTISOUND sensors Operating Instructions Manual page 16

5 Setup
Display
Current output
16
justment module is determined by the sensor and the sensor software
version.
In the menu item "Display" you can define how the measured value
should be presented on the display.
The following indication values are available:
•
Height
•
Distance
•
Current
•
Scaled
•
Percent
•
Lin. percent
The selection "scaled" opens the menu items "Display unit" and
"Scaling". In "Display unit" there are the following options:
•
Height
•
Ground
•
Flow
•
Volume
•
Without unit
Depending on selection, the different units are in turn available.
In the menu item "Scaling", the requested numerical value with deci-
mal point is entered for 0 % and 100 % of the measured value.
There is the following relationship between the indication value in the
menu "Display" and the adjustment unit in the menu "Device settings":
•
With ultrasonics, the indication value "Distance" means: Presenta-
tion of the measured value in the selected adjustment unit, e.g.
m(d).
Displayed value
Scaled
Display unit
Volume
l
Scaling
0 % = 0.0 l
100 % = 100.0 l
In the menu item "Current output" you determine the behaviour of the
current output during operation and in case of failure. The following
options are available:
Display and adjustment module for OPTISOUND sensors •