Table of Contents
Advertisement
Quick Links
Xpelair Simply Silent
Installation and Maintenance Instructions
DX100BR (92997AW) / DX100BS (93017AW)
DX100BTR (92998AW) / DX100BTS (93018AW)
DX100BHTR (92999AW) / DX100BHTS (93019AW)
DX100BPR (93001AW) / DX100BPS (93002AW)
DX100B Range Round Fan
D
o read the entire instruction leaflet before commencing installation.
Do install each fan with a means for disconnection in all poles in the fixed wiring.
Do make sure the mains supply is switched off before attempting to make electrical connections or carry out any
maintenance or cleaning.
Please leave this leaflet with the fan for the benefit of the user.
UK customers:
If you have any queries before or after installing this product call the Xpelair Technical Hotline +44 (0) 844 372 7766. Our
engineers are there to help you during normal office hours. Or you can fax at all other times on +44 (0) 844 372 7767.
Customers outside the UK should contact your local Xpelair distributor.
TM
DX100B Fan
Standard
Timer
Humidistat, Timer
Pull Cord
DX100B Range Square Fan
Advertisement
Table of Contents
Related Manuals for Xpelair Simply Silent DX100BR
Summary of Contents for Xpelair Simply Silent DX100BR
- Page 1 UK customers: If you have any queries before or after installing this product call the Xpelair Technical Hotline +44 (0) 844 372 7766. Our engineers are there to help you during normal office hours. Or you can fax at all other times on +44 (0) 844 372 7767.
- Page 2 Children shall not play with the appliance. Cleaning and maintenance of the appliance shall not be made by children. All Xpelair Simply Silent DX100B AC fans have the following features: Two speed extraction (selectable at installation) DX100BR/DX100BS - Operate the fan using an on/off switch (not supplied).
- Page 3 Back plate fixing positions Wall tube quickfix clamps Front Cover Removal Factory settings: Timer 15 minutes, RH 75% Depress Cover Latch with tool & remove Cover Maximum 30 minutes Minimum 30 seconds...
- Page 4 Wiring and setting up...
- Page 5 A 100mm diameter prepared hole. Appropriate ancillaries for termination. These items are available from Xpelair: 3m flexible ducting Ref: 89663AA. If the duct passes through a cold space use insulated duct ref: 89847AA. Soffit Grille Ref: 89742AW XCT100 – Condensation Trap. Ref: 89749AA. Fitted immediately above the fan, this prevents water ingress due to condensation forming in the duct above the fan and running down.
- Page 6 Install the isolating switch and on/off switch (if required). Make all connections within the isolating switch and the on/off switch (if required). Wet Rooms: On/Off switch must be situated so that it cannot be touched by persons making use of the bath or shower. For Australia Only –...
- Page 7 Wire the electrical connections. 11. Make sure the mains supply is isolated. Switch off the mains electrical supply and remove fuses. 12. Feed the cable to the terminal block. Wire the fan as shown in Figure F using the diagram appropriate to the fan model.
- Page 8 UK only: We, Redring Xpelair Group Limited, provide a guarantee against faulty parts and manufacture for a period of 2 years from the date of purchase. In the unlikely event of a product breakdown during the guarantee period the product should be returned to the place of purchase or to Redring Xpelair Group Limited.
Need help?
Do you have a question about the Simply Silent DX100BR and is the answer not in the manual?
Questions and answers