Reprogramming R2Lc Circuit Boards To Restore Features - Lionel FM Trainmaster Owner's Manual

Maintaining and servicing your
FM Trainmaster

Reprogramming R2LC circuit boards to restore features

D ue to the inevitable derailments, static,
and the negative nature of electricity, it
is possible that your R2LC could someday
loose its setup program.The symptoms of
STEP 1: Move switch on locomotive from
run to program.
STEP 2: Turn on Command Base.
STEP 3: Place locomotive on track, then
turn on power to track.
STEP 4: Press "ENG" then input locomo-
tive's ID#. Press "SET"
STEP 5: Press "ENG", then the ID#,
"AUX1", then press 6 for your locomotive.
this condition would be unresponsiveness in
command mode. This can be easily reme-
died by "reprogramming" your R2LC using
the following steps:
STEP 6: Turn off power to track, wait ten
seconds.
STEP 7: Remove locomotive from track,
move switch from program to run.
STEP 8: Place locomotive back on track,
turn power on to track.
STEP 9: Press "ENG" and ID#, then oper-
ate as normal.
13