Schwinn 270 Assembly Manual page 43

Condition/Problem
Fan will not turn on, but
Console operates
Unit rocks/does not sit
level
to pedal
Clicking sound when
pedaling
Seat Assembly shifts /
squeaks when in use
Workout results will not
sync with Bluetooth ® en-
abled device
Things to Check
Check for blockage of fan
Check leveler adjustment
Check surface under unit
Check pedal to crank
connection
Check crank to axle
connection
Check pedal to crank arm
connection
Hardware
Current console mode
Total time of workout
Fitness machine
Bluetooth ® enabled device Consult your device to be sure that the Bluetooth
Fitness App
Unplug unit from electrical outlet for 5 minutes. Remove mate-
rial from fan. If necessary, detach the Console to help with
removal. Replace the Console if unable to remove blockage.
Adjust levelers until machine is level.
Adjustment may not be able to compensate for extremely un-
even surfaces. Move machine to level area.
Pedal should be tightened securely to crank. Be sure connec-
tion is not cross threaded.
Crank should be tightened securely to axle. Be sure cranks are
connected at 180 degrees from each other.
Remove pedals. Make sure there is no debris on threads, and
reinstall the pedals
Check hardware that attaches Seat assembly, and fully tighten
hardware.
Machine must be in Idle Mode to sync. Push the PAUSE/STOP
button until the Power-Up Mode screen is displayed.
A workout must be longer than 1 minute to be saved and
posted by the Console.
Unplug unit from electrical outlet for 5 minutes. Reconnect to
outlet.
feature has been enabled on it.
is compatible.
Contact appsupport@nautilus.com (if inside US/Canada)
or your local distributor (if outside US/Canada) for further
assistance.
Solution
® wireless
43