Selecting Filter Factor Number; Deselecting Filter - Sekonic LITEMASTER PRO L-478 Series Operating Manual

Find Quality Products Online at:

6-5-2. Selecting Filter Factor Number

Up to four filters can be used as a pack with the
exposure display compensated for all.
Select the necessary filter name only which will be
used in the measurement.
1) Setting Amount of Filter Compensation
1. Touch the Tool Box icon at the bottom of the
Measuring screen to open the Tool Box screen.
2. Touch the [Filter Compensation] to display the
Filter Compensation Setting screen.
3. Touch the radio button of [Filter pack in use]
to display the Filter Pack in Use screen.
4. Touch any of four [Filter Name] Buttons on the
Filter Pack in Use screen. The Select User Filter
Screen is displayed.
5. When there are multiple pages, move your
finger over the Slide or touch the UP/DOWN
arrows ▲/▼ to view additional filter names.
Touch a Filter Name to enter it and return to the
Filter Pack in Use screen.
6. Repeat Steps 4 and 5 to register other filters
(Up to four filters listed on the Filter Pack in
Use Screen are compensated all at once).
When finished, touch the [Close] to return to
the Filter Compensation Setting Screen.
7. A numbered list of the filters you selected will
appear on the screen. The radio button will
also show that this filter selection will be in use
when a measurement is made.
8. Touch the [OK] to return to the Measurement Screen
to start metering with the filter pack you created.
•
See "8. Registered Filters (See P63 for details)" for
details about preset filters registered in the default setting,
and "6-6-7.Filter Name Editing (See P57 for details )" for
details about customized preset filters.

6-5-3. Deselecting Filter

1. Touch the Tool Box icon
of the Measuring screen to open the Tool Box
screen.
2. Touch the [Filter Compensation] to display
the Filter Compensation Setting screen.
3. Touch the radio button of [No Filter] in the
displayed Filter Compensation Setting screen
to deselect the filter in use.
4. Touch the [OK] to return to the Measuring
screen for normal metering with no
compensation.
GlobalTestSupply
www.
Tool Box Screen
Filter Compensation Setting Screen
Filter Compensation
Setting
Filter
Compensation
Filter Pack in Use
1 : CTO Double
2 : CTO Full
3 : CTO Three-Quarter
4 : CTO Half
No Filter
OK
Filter Pack in Use Screen
Select User Filter
Select User Filter
No Filter
CTO Double
CTO Full
CTO Three-Quarter
CTO Half
at the bottom
Filter Compensation
Setting Screen
Filter Compensation
Setting
Filter
Compensation
Filter Pack in Use
1 : CTO Double
2 : CTO Full
3 : CTO Three-Quarter
4 : CTO Half
No Filter
OK
49
.com
: -1.2
Filter
factor
numbers
Cancel
Screen
: -1.2
Cancel
sales@GlobalTestSupply.com